PythonX - the structural steel plasma cutting technology leader

Material Sizes for Processing

Profile Shape                        Minimum Maximum Note
Beam Width 4" (101 mm) 48" (1219 mm) 36" is standard
Beam Height 4" (101 mm) 17" (432 mm)  
HSS Tube 2" x 2" (50 x 50 mm)
24"x16" (609x406 mm)  
Channel Width 3" (76 mm) 36" (914 mm)  
Channel Height 1.25" (32 mm) 4" (101 mm)  
Angle 3"x3" (76 x 76 mm) 8"x8" (203x203 mm) smaller angle may need support inserts
Strip/Plate Width 4" (101 mm) 36" (914 mm) need support inserts
Strip/Plate Thickness 0.25" (6.3mm) 1.25" (32 mm)  
Part Length Standard is 40 feet.   Can increase to 80 feet in increments of 4 feet at a time.
Material Thickness Pierce up to 1.50" (38 mm).       Edge Start up to 2" (51 mm)

Unparalleled Versatility And Accuracy For Any Fabrication Shop

PythonX fabricates a much wider variety of structural sections and sizes compared to conventional single-purpose machines. Whether it's a 3"x3" angle or a large W36x300 beam, and everything in between, PythonX automatically processes 99% of the typical structural fabrication shop's material.

 

PythonX can pierce (holes, slots, etc.) material up to 1.50" thick and can edge start cut (cut to length, notch, etc.) material up to 2" thick. An upgrade to 2" piercing and 3" edge start cutting is available.

 

NOTE: On thick, large column sections where the traditional bandsaw starts to break off teeth and "wander" through the cut, PythonX produces perfectly square cuts that can meet an 80%+ bearing requirement. No grinding, no fixing and no wasting time.

special fabricated channel piece