Material Sizes for Processing
System Accuracy
Profile Shape |
Minimum
|
Maximum |
Note |
Beam Width |
4" |
48" |
 |
| Beam Height | 4" |
16" |
|
HSS Tube |
2" x 2" |
24"x16" |
|
Channel Width |
3" |
36" |
|
| Channel Height | 1.25" |
4" |
|
Angle |
3"x3" |
8"x8" |
smaller angle may need support inserts |
Strip/Plate Width |
4" |
36" |
need support inserts |
| Strip/Plate Thickness | 0.25" |
1.25" |
|
Part Length |
Standard is 40 feet. Can increase to 80 feet in increments of 4 feet at a time. |
Material Thickness |
Pierce up to 1.25" - Edge Start up to 2" |
System Accuracy
The PythonX routinely produces parts that are within 1/32" (0.0313") tolerance over the length of the part. Actual part tolerance is often tighter, since the positional repeatability of the cutting robot is 12 times more precise at 0.0026". |
Material Sizes & System Accuracy
PythonX fabricates a much wider variety of structural sections and sizes compared to conventional single-purpose machines. From 3"x3" angle to large W36x300 beams and everything in between, PythonX automatically processes 99% of the typical structural fabrication shop's material.
PythonX can pierce (holes, slots, etc.) up to 1.25" thick material and can edge start cut (cut to length, notch, etc.) material up to 2" thick.
NOTE: On thick, large column sections where the traditional bandsaw starts to break off teeth and "wander" through the cut, PythonX produces perfectly square cuts that easily meet an 80%+ bearing requirement. No grinding, no fixing and no wasting time.
